HEAVY DUTY LEVELING FEET FOR BBQ ISLANDS
BUY IN BULK AND SAVE $$$
This is not cheap little leveling feet for light furniture. This is real Heavy Duty 1/2" bolt welded to a 3x3 14 gauge steel plate.
Designed for 1000+ lbs modules. If you want something super strong that will last this is your best choice.
The steel base plate has 4 pre drilled holes so you can secure to the concrete with blue tapcon masonry screws.
With steel tube you can raise up the frame approx 3 1/2" and steel tracks 4"
Bolt: 1/2" x 6" long (Zinc)
Base Plate: 3x3 14 gauge (Zinc)
Bolt welded to base plate.
2ea 1/2" nuts
2 each washer
Recommended # Per Module
4 needed for a 4 or 5 ft long module
6 needed for an 8 ft long module
1/2" DRILL BIT.
A bit pricey when you need a lot, but totally worth it. Best solution out there to level and keep the frame off the ground.
These feet are really strong!!! I put a piece of thin plastic under them (cut to size), so that there would be no rust marks underneath.
I have purchased many kits from BBQ Tubes, I feel that BBQ Tubes is the best DIY kits available on the commercial markets
Customers Also Viewed